. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 32 ADJUST IDLER CLE The idler moves forwar worn. become As t hey b ecome worn, t here is side p lay in th e idler , or th e idler turns at an angle, causing the track to come off or resulting in uneven wea r, so adjust a s follows ressure when this ADJUSTING IN SIDEWAYS DIRECTIO 1. Drive the machine f or 8 to 12 m ( 24.4 to 3 6.6 ft) on flat ground, hen measure clear ance A (4 places: left, right, i nside outside) between the track fr ame and sid e guide ( 2.
I f clearance A is mo re than 4 m m (0.158 remove bolt (1), hen t ake out shim, a nd adjust to t hat t he cl earance on one side s les s than 0.5 to 1 mm (0.020 t o 0.039 i Ther e are two types of (thicknes s: 0.5 mm (0.0 2 in) and 1.0 mm (0.0 4 in)).