. MAINTENANCE SERVICE PROCEDURE position before 4 - 53 CHECK OIL LEVEL IN DAMPER CASE, ADD OIL 1. Open the en gine side cover on the left side of the c hass 2. Remove dips tick (G) and wipe t he oil off with a clot 3. Fully insert d ipstick (G) into filler pipe (F), then remove it 4. The oil on the oil level gauge (G) should be between t he H mark and L mark. If the oil is be low the L mark, add oil through the dipstick g uide. 5.
If the oil is a bove the H mark, o pen inspection cove r (2) in the center of the bottom face of th e power train case , drai n the excess oil fro m drain plug (P) of the engine damper whic h can be seen towa rds the front of the machine from the inspection window, then check the oil level again. REMARK Check the oil level while the engi ne is stopped. If the machin checking the