. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE the new filter cartridge with clean fuel, coat the packing surface thinly with oil, then 4 - 56 2. 3. Set the container Loosen drain valv to catch the fuel under t e (3), then drain all the w he filter cartridg ater and sedime e (2). nt in the transparent c cartridge (2). Using a filter wre 4. remove it. (This 5. Using a filter wre nch, turn filter cartridge (2) counterclockwise to 6. Remove seal (5) from transparent cap (4 ), then clean the cap. 7. If transparent cap Coat new seal ( (4) is damaged, replace it with a new part. 5) with clean fuel or oil, then install it to 4). t cap (3) to new filter cartridge (2).
ue for transparent cap: gm, 7.2 lbft) transparent cap ( 8. Install transparen t cap (3) to new filter ca Tightening torq ue for transparent cap: 10.0 Nm (1.0 k 9. Check that the dr ain valve (3) at the botto m of transparen t cap (4) is tightened s Tightening torque (4) is tightened s ecurely. : 0.2 - 0.45Nm ( 0.02 -0.046 kgm, 0.1 - 0.3 lbft) Tightening torque 10. install to the filter