Komatsu — EVERY 4000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 4 - 74 CHECKING FOR LOOSENESS OF HIGH-PRES Check visually and touch with your fingers to check clamps (1) to (15). If there is any looseness or harden ed rubber, contact your Komatsu distributor for replacement. NOTICE If the engine continues to be used when there are loose bol ts, hardened rubber, or missing parts, there is danger of damage or breakage occurring due to vibration and wear at the con high-pressure piping clamps are correctly installed. nections of high-pressure piping.

Always check that the proper CHECKING FOR MISSING FUEL SPRAY PREV Fuel spray prevention caps (1) - (16) and fuel spray p revention cover (17) are protective parts installed to prevent fire caused by fuel leaking and spraying out on to hig h temperature parts of the engine. Check visually that there are no missing caps or loose bolts, and feel with your finger to check that the rubber has not hardened. If there is any problem, the problem part must be replaced. Con