Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS Gear shifting When the steering, directional, and gearshift lever is at the FORWARD or REVERSE position and switch (c) or switch (d) is pushed, the transmission speed will change. UP switch (c): Each time the switch is pressed, the transmission will shift up one speed. DOWN switch (d): Each time the switch is pressed, the transmission will shift down one speed. For details of the maximum speed in each speed range, see "SPECIFICATIONS (PAGE 5-2)". WARNING 3 - 39 REMARK isplayed on panel A on the monitor panel according to the gearshift operation. splay panel. on the display panel. on the display panel.

locked, P is displayed. shifting gears according to the shift mode, see the "SHIFTING GEARS (PAGE The speed range being used is d isplayed on panel A on the monitor pane l according to the g earshift operati Neutral: N is displayed on the di FORWARD 2nd: F2 is displayed REVERSE 3rd: R3 is displayed Whe n the parking brake lever is F or details of the method of hif AGE 3 b -104)". Shift mode selection means that the selected speed range is displayed at the N EUTRAL positio n (N) efore starting.

O perating counter-rotation tur Whe n operating the counter-rotation turn, if the load on the left and right i s not balanced, the machine m ay make a pivot tu rn, so chec k the ground conditions and be careful not to hit any obstacles when carrying out the operation. With the lever in the N position , move the lever partially in the direction of turn. The left and ri ght tracks will rotate in opposite directions, and the machine will m ake a slow counter-rotation turn. If th e lever is moved further, the speed of the counter-rotation turn will i ncrease. Right counter-rotation turn Left counter-rotation turn (R): (L):