Komatsu — 3.4.7 MAINTENANCE MONITOR

OPERATION 3.4 VEHICLE HEALTH MONITORING SYSTEM VHMS – HEALTH MONITOR 3.4.7 MAINTENANCE MONITOR The Maintenance Monitor can be selected from the Main Gauge Screens 1, 2 or 3 by pressing the Maintenance button F5. The color of the icon above the button changes to yellow when main- tenance is due. The color will change to red when maintenance is overdue. The illustration Z25539 shows a Maintenance Monitor of a new machine which has been operated for 10 operating hours. There are 240 hours left before the 250 hour maintenance is due and 2990 hours before the 3000 hours maintenance is due. For returning to the Main Gauge Screen press button F5. Peculiarities to be observed:

Higher maintenance also include lower maintenance. (Lower maintenance must also be carried out!) Exception: On perfor- mance of the 3000 h maintenance it is not necessary to also carry out the 2000 h maintenance. The maintenance cycles are rigidly linked to the running time meter. Only running time hours are taken into consideration (No minutes or seconds). NOTICE The routine visual checks and inspections after every 10 and 50 operating hours are not called up on the Maintenance Monitor. Carry out these checks and inspections according to the MAINTENANCE section 4 in this manual.

The engine maintenance has to be carried out according to the separate Engine Operation and Maintenance Manual filed in volume 2 binder. REMARK On new machines an INITIAL SERVICING after the first 250 and 1000 operating hours is required, in addition to the periodic maintenance intervals displayed on the monitor. Carry out all maintenance items according to the MAINTENANCE section 4 in this Manual. Maintenance confirmation through Service Personnel Maintenance indicated with yellow or red color of the icon above the maintenance key F5 should be confirmed through Service Personnel in the Service Menu subsequent to the execution of the maintenance.

With the confirmation the actual value maintenance number is increased by 1. Thus, the length of the maintenance cycle is added to the display value and the gray color will appear on the maintenance icon. The message in the Service Menu for maintenance confirmation then turns white instead of yellow. For more information of maintenance confirmation refer to the Service Manual of the machine. 109