OPERATION 3.6 OPERATING THE HEATER, VENTILATION AND AIR CONDITIONING Key T3: Recirculating Air/Fresh Air Switches from recirculated air to fresh air and vice versa. Key T4: Blower Control Switches on the manual blower control. Press plus/minus key to select the following speeds: 1*) -2-3-4-5. 1*) to 5: adjusts the blowers to speeds 20%, 40%, 60%, 80%, 100%. Off*): Switches off the blowers or switches to automatic. Automatic: The blowers are controlled automatically based on the interior temperature. Key T5: Automatic climate control Switches on the automatic temperature control. Key T2+T3: Temperature indication. Shows the inside temperature for 10 seconds.
If pressed a sec- ond time, it shows the outside temperature for 10 seconds (optional) Key T3+T5: Reheat (optional) Starts reheat mode fro 3 minutes. (Duration adjustable) Key T3+T4: Controller OffSwitches of all controll functions and the display. *) The following blower steps are disabled when the automatic cli- mate control is on. 2-,3-Step: off continuously adjustable blower: Off, 1 Air Flow Control For defrosting the windshield close the slide in the seat base. The whole air flow is now directed to the windshield. To direct the air flow to your feet, open the slide in the seat base. 141