OPERATION 3.9 CHECKS BEFORE STARTING THE ENGINE 3. Coolant level DO NOT remove the radiator pressure cap (9), illust. Z21613 from a hot engine. Wait until the temperature is below 50°C before removing the pressure cap (9). Failure to do so can result in personal injury from heated coolant spray or steam. Turn the radiator cap (9) slowly counterclockwise to the safety stop to allow the pressure to escape, then continue to turn until cap is free to be removed. The coolant level should be in the upper field of the sight gauge (8). If necessary add coolant. REMARK Refer to the Engine Manual for the correct coolant composi- tion. 177 WARNING WARNING