Komatsu — 3.12.1 SLEWING THE SUPERSTRUCTURE

OPERATION 3.12 SLEWING AND BRAKING THE SUPERSTRUCTURE 3.12 SLEWING AND BRAKING THE SUPERSTRUCTURE 3.12.1 SLEWING THE SUPERSTRUCTURE MACHINES WITH "EURO" CONTROL Legend for illustration Z25568 CCW- Lever (1) to the left ”L” Neutral position CW- Lever (1) to the right ”R” REMARK The slew speed can be increased by activating the slew speed switch (2) on the control lever (1). For smooth and efficient slewing operation, use the higher slew speed only for slewing angles greater than 90°. Be sure everyone is in the clear before slewing the super- structure. Never swing or position the attachment or load over per- sons or vehicle cabs.

Never allow anyone to walk or work under the Shovel or load while the Shovel is operating. 197 WARNING