Komatsu — 3.12.3 SLEW PARKING BRAKE

3.12 SLEWING AND BRAKING THE SUPERSTRUCTURE OPERATION 3.12.3 SLEW PARKING BRAKE The parking brake for the slew gears is a spring loaded disk type brake. This brake is switched ON and OFF with toggle switch (4). NOTICE The slew parking brake must only be applied with the Super- structure at complete standstill. Applying the parking brake with superstructure still slewing may result in severe dam- age to the brake. Use the slew parking brake only in an emergency situa- tion for stopping the rotating superstructure.

If the parking brake has been used for emergency stop- ping, it is necessary to shut down the Excavator and to have the parking brake of each swing gear inspected and repaired if necessary. Contact your Komatsu dealer for support. SWITCH POSITIONS Parking brake OFF Parking brake ON APPLYING THE PARKING BRAKE Pull out toggle switch (4) against spring force and move down to position . RELEASING THE PARKING BRAKE Move up toggle switch (4) to position . In this position the switch is automatically pulled down by spring force. NOTICE Be sure to release the parking brake before slewing the superstructure. 200 WARNING WARNING