OPERATION 3.14 WORKING INSTRUCTIONS DO NOT "Sweep" with the loader attachment, illust. (Z 10369), as this may result in severe damage on slew gear components. DO NOT use the bucket clam for loosening or removing anchored rocks or other solid objects (illust. Z 19984 and Z 19985), since such operations may result in severe damage to the clam pivot bearings. Be careful not to spill the load. When the bucket is fully loaded, do not raise the boom fully. If the boom is raised fully, the load can spill to the rear and cause danger to the operator.
Precautions when operating hydraulic cylinders to end of stroke Do not operate the hydraulic cylinders of the working attachment to the end of their strokes. This will bring excessive force onto the inner stoppers of the cylinders and will reduce the lifetime of the cylinders. To prevent this, move the control levers to neutral position before the cylinders reach their end of stroke. 211 CAUTION CAUTION CAUTION CAUTION WARNING WARNING