Komatsu — 3.19.1 OPERATING THE TRANSFER PUMP

OPERATION 3.19 TRANSFER PUMP FOR HYDRAULIC OIL 3.19.1 OPERATING THE TRANSFER PUMP Legend for illust. Z25471 REMARK The illustration shows the transfer pump arrangement viewed from center of the platform.

(1) Cock for suction oil reservoir (11) (2) Cock for return oil collector pipe (12) (3) Cock for back-pressure valve pipe (13) C - Closed O - Open (4) Electric motor of the transfer pump (5) Transfer pump (6) Operating switch (S35) for transfer pump (4) (7) Suction line to suction oil reservoir (11) (8) Suction line to return oil collector pipe (12) (9) Suction line to back-pressure valve pipe (13) (10) Hand wheel of main shut-off valve between suction oil reservoir and main oil reservoir To OPEN the valve turn hand wheel (10) CCW to the stop. To CLOSE the valve turn hand wheel (10) CW to the stop. A proximity switch located on the gearbox of the shut- off valve monitors the valve position.

With the valve not fully open a corresponding message will be dis- played on the screen in the Operator’s cab. Before starting the engine make sure the shut-off valve is completely open by turning hand wheel (10) fully to the left (CCW). (11) Suction oil reservoir (12) Return oil collector pipe in front of main control valves (13) Back-pressure valve pipe (14) Back-pressure valve 233 CAUTION CAUTION