OPERATION 3.20 CENTRAL REFILLING SYSTEM 3.20.4 REFILLABLE GREASE CONTAINERS OF THE CENTRAL LUBRICATION SYSTEM AND SWING CIRCLE PINION LUBRICATION SYSTEM Legend for illustration Z 23030 (A) Grease supply line to the injectors for lubrication of the loader attachment, swing circle bearing and swing machinery pinion bearing (B) Grease supply line to the injectors for lubrication of the swing circle tooth- ing (P) Pressure oil supply from pilot oil circuit to hydraulically driven grease pumps (5 and 12) (R) Return oil to main hydraulic oil reservoir (1) Grease refilling line from service arm adapter to grease filter (2) of the cen- tral lubrication system (2) Grease filter for central lubrication system.
Before filling the grease con- tainer make sure the filter is not obstructed. Service the filter element according to the instructions in the maintenance section 4, item no. 4.8. (3) Grease refilling line from grease filter (2) to grease container (4) of the cen- tral lubrication system (4) Grease container of the central lubrication system (5) Hydraulically driven grease pump (6) Grease pressure gauge (7) Grease supply line to the injectors of the central lubrication system, see (A). (8) Grease refilling line from service arm adapter to grease filter (9) of the swing circle pinion lubrication system (9) Grease filter for swing circle pinion lubrication system.
Before filling the grease container make sure the filter is not obstructed. Service the filter element according to the instructions in the maintenance section 4, item no. 4.8. (10) Grease refilling line from grease filter (9) to grease container (11) of the swing circle pinion lubrication system (11) Grease container of the swing circle pinion lubrication system (12) Hydraulically driven grease pump (13) Grease pressure gauge (14) Grease supply line to the injectors of the swing circle pinion lubrication system, see (B). (15) Grease level gauge. Check grease level in both containers at regular inter- vals. (16) Breather filter 249