Komatsu — 4.6.3 PERIODIC SERVICING SCHEDULE

MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE 4.6.3 PERIODIC SERVICING SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual FIRE DETECTION AND ACTUATION SYSTEM filed in volume 2 binder. (4) Perform maintenance according to separate Service Bulletin Eliminator Filter filed in volume 2 binder.

271 Service Intervals Service Point Service See When necessary Engine Air Cleaners Maintenance page 285 Swing circle toothing Immediately apply grease if bare spots are visible page 289 Automatic lubrication systems Replace or fill grease containers Clean or replace filter elements page 291 Track rollers If leakage occurs replace floating seals and fill with GL ISO VG CLP 220 page 295 Carrier rollers Guide wheels Cold starting aid Replace fluid cartridge The fluid cartridge is located on the LH air cleaner carrier. (1) Every 10 operating hours or daily Shovel Walk-around inspection page 297 Working attachment Check grease injectors of auto- matic lubrication system.

Check for proper lubrication. page 301 Swing circle Check grease injectors of auto- matic lubrication system. Check for proper lubrication. page 305 Air cleaner Clean pre-cleaner page 307 Radiator Check coolant level page 309 Track groups Clean, esp.

in winter page 309 Fuel system water separator Drain water page 311 Engine Check oil level (1) Eliminator filter Maintenance check (4) Every 50 operating hours or weekly Swing gears and Motor adapter housings and Brake housings Check oil levels page 313 Travel gears, Brake housings and Motor adapter housings Check oil levels page 317 Final drives Check oil level page 319 PTO (Pump distributor gear) Check oil level page 325 Hydraulic access ladder Check safety sensor page 327 Hydraulic oil cooler and radiator Check and clean as necessary page 329