4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE 4.6.4 REPLACEMENT OF HYDRAULIC HOSE LINES AND FUEL HOSE LINES Hydraulic hoses and fuel hoses are subjected to natural aging. Hence, their usable lifetime is limited to maximum 6 years. NOTICE Hose lines considered as Safety Critical Parts have to be replaced earlier, see page 277 for more information. The maximum permissible storage time of hydraulic hoses and fuel hoses is 2 years. This storage period is part of the usable lifetime and must be considered when a new hose line is being installed. If, for example, a hose line with a one year storage time is to be installed, the remaining service life of the hose line is 5 years.
All hose lines are marked with the date of production. All hydraulic hoses and fuel hoses of the Shovel have to be replaced after every 6 years at the latest, even if there is no visi- ble damage. Repairs on hydraulic hoses and fuel hoses are not allowed. Use ONLY GENUINE KMG replacement hose lines. INSPECTION OF HOSE LINES Inspect all hoses, hose lines and fittings during the course of the daily walk-around inspection. Check for leaks and damages. Replace damaged parts without delay. Hydraulic fluid escaping under pressure can cause serious injuries. Fuel and oil leaks can cause fires. Some examples of faults on hydraulic hoses and fuel hoses requiring replacement of the concerned part:
Damage to the outer layer (e.g. chafed spots, cuts or scratches). Brittle top layers. Flaws on the hose material Distortion of the hose line (strong deviation from the original shape) under pressurized and pressureless conditions or when kinked or crushed, e.g. disintegration of hose layers or blistering. Leaks Detachment of hose and fitting. Damaged hose fitting. 276 CAUTION CAUTION WARNING WARNING