4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE Safety critical parts 278 No. Safety critical parts for periodic replacement Replacement intervals 1. Hydraulic system Every 6000 operating hours or every 2 years, whichever comes first 1.1 High pressure hoses 1.1.1 Hoses between main pumps, pressure filters and main control blocks 1.1.2 Hoses between manifold and return oil collector pipe (sec- ondary relief valve lines) 1.1.3 Hoses between manifold and all attachment cylinders 1.1.4 Slew circuit hoses 1.1.5 Travel circuit hoses 1.2 Accumulator for pilot control circuit 2.
Fuel system 2.1 Fuel supply hoses 2.2 Fuel return hoses 2.3 Fuel drain hoses 2.4 Fuel refilling hoses 2.5 Fuel cooler hoses (if so equipped) 3. Turbocharger lubrication system 3.1 Oil supply hose 3.2 Oil drain hose Every 3 years 4. Seat belts 5. Portable fire extinguishers Observe the instructions on the main- tenance sticker affixed to the fire extinguisher container. 6. Automatic fire detection and suppression system Follow the instructions given in the manufacturer’s maintenance manual.