Komatsu — 4.6.7 MAINTENANCE OF THE ENGINE

MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE Extended Service Intervals for Engines equipped with Engine Oil Management System Every 400 to 500 operating hours (except for machines destined for Australia) The reserve tank contents of engine oil is sufficient for 400 to 500 hours of operation depending on operating condi- tions and environmental factors. Fill the reserve tank via the service arm. Use engine oil according to the specifica- tions in the Engine Operation and Maintenance Manual. Change both oil filter cartridges (4) and clean breather fil- ter (10). Every 4000 operating hours (except for machines destined for Australia) Change engine oil.

Drain the oil from engine oil pan and from engine oil reserve tank. It is recommended to change the oil when the oil level in the reserve tank is near the minimum level. Every 500 operating hours (for machines destined for Australia only). Change both oil filter cartridges (4) and clean breather fil- ter (10). Every 1000 operating hours (for machines destined for Austra- lia only). Change engine oil. Drain the oil from engine oil pan and from engine oil reserve tank. It is recommended to change the oil when the oil level in the reserve tank is near the minimum level.

NOTICE After the engine oil has been drained from the engine oil pan and from the reserve tank, fill engine oil pan and reserve tank via the swing down service arm. The service arm receiver panel has two connectors for filling of engine oil, one connector for the engine oil pan and one connector for the reserve tank. DO NOT use the oil in the reserve tank to fill the engine oil pan after an oil change. See section "CENTRAL REFILLING SYSTEM" on page 238 for more information. Refer also to the Engine Operation and Maintenance Manual for oil change procedure and oil specifications.

REMARK Service the Eliminator Oil Filtration System according to the sepa- rate Service Bulletin "Eliminator Filter" filed in volume 2 Binder. 4.6.7 MAINTENANCE OF THE ENGINE NOTICE All maintenance has to be carried out in accordance with the sepa- rate Engine Operation and Maintenance Manual. 283