SAFETY 2.1 SAFETY INSTRUCTIONS 2.1.9 SAFETY HARNESS IN CONFORMITY WITH EN 361 (EUROPEAN STANDARD) Always use the Safety Harness (1) in conjunction with strap type Fall Absorber (2), illust. (Z 20885) before mounting onto the loader attachment or other unsecured places of the Shovel. NOTICE The Safety Harness is located in the Cabinet of the Oper- ator’s Cab. The illustration (Z 20885) shows a typical use of the safety harness. Shovels with new type Operator’s cab are not equipped with ladder (3), because the air conditioner unit of the new type cab is located on the back wall of the cab.
Legend for illustration Z 20885 (1) Safety Harness according to EN 361 (2) Strap-Type Fall Absorber according to DIN EN 355 (3) Ladder to cab roof and railings (attachment points) (4) Protection hoods for roof mounted air conditioning, if so equipped (A) Shoulder Strap (B) Back Plate (C) Catching Hook (D) Shoulder-Strap Fixing (E) Belly Strap (F) Holding Hook (G) Hold-Back Hook (H) Pelvis Strap (J) Leg Strap 29 WARNING WARNING