Komatsu — 4.9.2 TRAVEL GEARS, BRAKE HOUSINGS AND MOTOR ADAPTER HOUSINGS MANUFACTURED BY "L&S" - CHECK OIL L...

MAINTENANCE 4.9 EVERY 50 OPERATING HOURS OR WEEKLY 4.9.2 TRAVEL GEARS, BRAKE HOUSINGS AND MOTOR ADAPTER HOUSINGS MANUFACTURED BY "L&S" - CHECK OIL LEVELS Legend for illustration Z 20434 Travel Gears (1) Oil level gauge (2) Oil filler plug (3) Breather filter REMARK The breather filters for the travel gears are mounted inside the center frame and connected with extension hoses. Motor Adapter Housings (4) Breather filter. The bore of the breather filter is also used as a level and filler opening. REMARK The breather filters for the motor adapter hous- ings are mounted inside the center frame and con- nected with extension hoses.

Brake housings (5) Oil level plug (6) Oil filler plug CHECK TRAVEL GEAR OIL LEVEL Remove oil level gauge (1) and wipe it clean. Screw in the gauge and remove again. Oil level should be at the upper mark of gauge (1). If necessary add oil through filler opening (2). CHECK MOTOR ADAPTER HOUSING OIL LEVEL Check oil level by removing breather filter line connector on port (4). Oil level should be at lower edge of opening (4). If necessary, add oil through the filler opening. Screw in breather filter line con- nector into port (4). CHECK BRAKE HOUSING OIL LEVEL Check oil level by removing oil level plugs (5). Oil level should be at lower edge of openings (5).

Add oil through filler openings (6) if necessary and install plugs (5) and (6). 317