Komatsu — 4.9.4 TRAVEL GEARS AND MOTOR ADAPTER HOUSINGS MANUFACTURED BY "ZOLLERN" - CHECK OIL LEVELS

MAINTENANCE 4.9 EVERY 50 OPERATING HOURS OR WEEKLY 4.9.4 TRAVEL GEARS AND MOTOR ADAPTER HOUSINGS MANUFACTURED BY "ZOLLERN" - CHECK OIL LEVELS Legend for illustration Z 25896 Travel Gears (1) Oil level gauge (2) Oil filler plug (3) Breather filter REMARK The breather filters for the travel gears are mounted inside the center frame and connected with extension hoses. (4) Oil drain plug Motor Adapter Housings (5) OIl filler and level plug for wet running motor shaft (6) Oil drain plug, motor compartment CHECK TRAVEL GEAR OIL LEVEL Remove oil level gauge (1) and wipe it clean. Insert gauge but do not screw it in. Remove again. Oil level should be at the upper mark of gauge (1).

If necessary add oil through filler opening (2). CHECK MOTOR ADAPTER HOUSING OIL LEVEL Check oil level by removing plug (5). Oil level should be at lower edge of opening (5). If necessary, add oil through the oil fillerand level opening. 321