Komatsu — 4.10.6 AUTOMATIC LUBRICATION SYSTEMS - CLEAN IN-LINE GREASE FILTER

MAINTENANCE 4.10 EVERY 250 OPERATING HOURS OR MONTHLY 4.10.6 AUTOMATIC LUBRICATION SYSTEMS - CLEAN IN-LINE GREASE FILTER Legend for illustration Z 21465 (1) Grease pump drive (Hydraulic cylinder) (2) Solenoid valve (Oil pressure supply) (3) Flow control valve (4) Pressure reducing valve (5) Hydraulic oil supply line (Pilot pressure) (6) Hydraulic oil return line (7) Vent valve (Solenoid valve, de-energized open to barrel) (8) Grease supply line to injectors (9) Lubricant level indication, (Sonar sending and receiver principal) (10) Grease barrel (11) Pump mechanism (12) Grease filter element (13) Hydraulic pressure test plug (Operating pressure) (14) Grease pressure gauge (Operating pressure) (15) Vent line to barrel (16) Breather (17) Electrical terminal box Components of In-Line-Grease-Filter:

(12) Filter element (18) Plug screw (19) Packing ring (20) Filter housing (21) Spring (22) Spring guide Before servicing stop the engine/motor and remove ignition key in order to prevent operation of the system. Be sure to vent system pressure before removing plug (18). A blocked filter can disintegrate under pressure and damage the automatic lube system. 335 WARNING WARNING