Komatsu — 4.12.2 HYDRAULIC SYSTEM - FILTER SERVICE

MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH FILTER SERVICE High Pressure Filters "HPF", illustration Z 21684 NOTICE The filter reference numbers correspond to the number- ing of main pumps and control valves. If a fault message "Trouble HPF ...." is displayed on the VHMS monitor, the engine will be shifted automatically to low idle speed. The fault message "Trouble HPF ...." indi- cates a restricted high pressure filter. Stop work and inform Service staff about the fault message.

Legend for illustration Z 21684 I HPF for pump I II HPF for pump II III HPF for pump III IV HPF for pump IV (2) Drain plug (3) Filter case (4) Hexagon (5) Filter element (6) Packing ring (7) O-ring (8) Back-up ring (9) O-ring (10) Filter header Clean or replace high pressure filter elements: 1. Place working attachment on the ground and shut-off the engine. Relieve pressure in the hydraulic system with several move- ments of the control levers. 2. Place a suitable container below the filter in order to collect outflowing oil. 3. Remove plug (2) and drain the oil. 4. Screw off filter case (3). 5. Remove element (5) and clean.

Take care not to contaminate the "Clean" inside of the element when flushing. 419