Komatsu — 4.12.7 HYDRAULIC OIL COOLER - INSPECT AND LUBRICATE DOOR HINGES

MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH 4.12.7 HYDRAULIC OIL COOLER - INSPECT AND LUBRICATE DOOR HINGES Provide adequate working platform for safe access to the hydraulic oil coolers. Check all door hinges (2) for good condition and proper fastening to their carrier frames. If cracks or distortion at the weld area of the hinges are found corrective action must be taken. DO NOT attempt to open the cooler doors before the damage has been repaired otherwise the cooler door may become detached and fall off. Danger of accidents. Legend for illust.

Z25186 (1) Hydraulic oil cooler (2) Cooler hinges (3) Grease fitting (4) Cotter pin Lubricate all cooler hinges (2) at grease fittings (3). Check to make sure that the hinge pins are properly secured with cotter pins (4). 435 WARNING WARNING