OPERATION 3.3 OPERATOR’S CAB - CONTROLS Switch Board (continued) Legend for illustration Z25964 (19) Switch for Truck counter number 2 (TR2). For counting loaded trucks rotate this switch. The total number of trucks loaded is shown on the VHMS monitor field TR2, refer to page 98 for more information. The push button for Truck counter number 1 (TR1) is located on the RH control lever. (20) Acoustic warning signal This signal sounds for approximately 1 second when a fault message appears on the VHMS screen. In case of too low hydraulic oil level this signal sounds continuously. Shut down the Shovel, locate and correct the cause immediately. Fill up hydraulic oil to the correct level.
For the correct checking procedure See "CHECKS BEFORE STARTING THE ENGINE" on page 174. 93 CAUTION CAUTION