OPERATION 3.3 OPERATOR’S CAB - CONTROLS 3.3.8 CONTROL MODULE FOR AUXILIARY CAB HEATER Special Equipment Legend for illust. Z25563 (5) Control module for the engine independent auxiliary cab heater (if so equipped). This module is used for switching ON and OFF the auxiliary cab heater dur- ing operation of the shovel with the Diesel engine running, and for pre-selection of heater start times and duration of heating periods. For detailed setting instructions of the control module refer to the sepa- rate operating instruction sheet in volume 2 binder.
(6) Button for actual time indication (7) Button for preselection of heating time (8) Button for heating indication (9) Button for settings backwards (10) Button for settings forward (11) Not used (12) Display shows the operating condition of the auxil- iary cab heater 97