MAN — Removing and installing valves

Removing and installing valves Removing valves D Remove rocker arms. Take off cylinder head, see page 104. Fig. 1 Screw valve assembly lever on to cylinder head. Note: Valve spring and valve spring retainer can also be replaced with the cylinder head installed. For this purpose the relevant pis- ton must be at TDC, and the valve assem- bly lever is required. 1 Fig. 2 Note: If a valve fixture is available in the work- shop, the procedure described may also be carried out on the said fixture. Use valve assembly lever to press valve spring retainer and spring downwards and take out tap- ered elements using a magnet. Lift assembly lever (caution: the spring is loaded) and slew it to one side.

2 Figs. 3 and 4 Take out valve discs, springs, discs and valves. Remove valve assembly lever. Note: The engines are equipped with valve stem seals (arrow). Take off valve stern seals. Turn cylinder head over and take out valves. 3 4 112