MAN — Removing and installing flywheel, replacing gear ring

Removing and installing flywheel, replacing gear ring Removing flywheel D Remove speed pickup Fig. 1 Loosen mounting bolts, securing the engine against turning if necessary. 1 Fig. 2 Remove two bolts facing each other and replace them by two guide pins (special tool). Remove all bolts. Pull off flywheel with suitable lifting gear. Danger: The flywheel is heavy. Use lifting gear. 2 Installing flywheel Fig. 3 Screw in guide mandrels. Apply sealing agent “Antipor 46” to the sealing face on the inside of the flywheel. Place guide mandrels on the flywheel, ensuring that the centering mandrel (arrow) fits correctly into the bore in the flywheel. Push on flywheel until it stops. 3 Fig.

4 Lightly oil new mounting bolts (elasticated bolts), screw them in and tighten alternately on opposite sides of the ring gear to specified torque. 4 87