Lubrication System/Oil Filter Adapter REMOVE OIL FILTER ADAPTER 1. Remove engine. (See machine technical manual.) 2. Disconnect spark plug wire (A) and voltage regulator leads (B). 3. Remove five cap screws (C) to remove lift bracket (D), and right side shroud (E). A—Spark Plug Wire B—Voltage Regulator Leads C—Cap Screw (5 used) D—Lift Bracket E—Right Side Shroud M36289 -UN-29JAN90 M98,2040K,52 -19-21OCT85 6. Remove two cap screws to remove oil filter adapter and gasket (A). M36441 -UN-29JAN90 CTM2 (19APR90) 40-21 16, 18, 20 & 24HP Onan Engines M98,2040K,54 -19-21OCT85 AllTractorManuals.com 130495 4. Remove oil filter (A). 5. Disconnect engine oil pressure sender wiring lead (B).
-UN-29JAN90 M36440 M98,2040K,53 -19-21OCT85 40 21