Governor/Governor Linkage DISASSEMBLE AND INSPECT GOVERNOR LINKAGE 1. Move governor arm. The governor arm must move freely without excessive play. 2. Inspect fork (A) and governor arm shaft (B) for wear or bent condition. Replace parts as necessary. M36475 -UN-29JAN90 M98,2045K,6 -19-21OCT85 3. Pull governor arm shaft outward. 4. Remove ball bearing from governor arm shaft hole using a magnet. M36476 -UN-29JAN90 M98,2045K,7 -19-21OCT85 6. Remove two screws to remove fork. If screws are tight, support governor arm shaft (A) and loosen screws using an impact driver. 7. Remove governor arm shaft.
M36478 -UN-29JAN90 CTM2 (19APR90) 45-4 16, 18, 20 & 24HP Onan Engines M98,2045K,9 -19-21OCT85 AllTractorManuals.com 130495 5. If necessary, remove staked ends of fork screws using a small grinder. -UN-29JAN90 M36477 M98,2045K,8 -19-02FEB87 45 4