Intake Manifold and Cylinder Heads/Intake Manifold NOTE: For T260 engine, go to step 5. 3. Install new gaskets with notch in gasket aligned with notch on intake port. 4. For B43E, B43G, or B48G engine, install intake manifold and tighten cap screws to 11 ± 3 N·m (97 ± 27 lb-in.). Install spacer (A). M36255 -UN-29JAN90 M36256 -UN-29JAN90 For P218G or P220G engine, install intake manifold and oil fill tube. Tighten cap screws to 6 N·m (53 lb-in.). CTM2 (19APR90) 10-5 16, 18, 20 & 24HP Onan Engines M98,2010K,11 -19-30JAN87 AllTractorManuals.com 130495 2. For T260, P218G, or P220G engine, install gasket (A) spacer (B), gasket (C), and carburetor on intake manifold.
Install and tighten two cap screws. For B43E, B43G, or B48G engine, install carburetor on intake manifold and fasten with cap screws. -UN-25JAN90 M36924 T260, P218G, P220G Engine -UN-22NOV89 M36254 B43E, B43G, B48G Engines M98,2010K,10 -19-30JAN87 10 5