Introduction/About This Manual ABOUT THIS MANUAL This Component Technical Manual (CTM-2) covers the recommended repair procedures for all 16, 18, 20, and 24 HP Onan Engines removed from the machine. These engines can be repaired on a clean work bench or put on an engine stand. Some components may be serviced without removing the engine from the machine. You may want to determine the repair procedure before you remove the engine. Refer to the machine technical manual for engine removal and installation procedures.
CTM2 (19APR90) 00-2 16, 18, 20 & 24HP Onan Engines M98,INTR,1 -19-11NOV85 AllTractorManuals.com 130495 FEATURES OF THIS TECHNICAL MANUAL John Deere ILLUSTRUCTION format emphasizing illustrations and concise instructions in easy-to-use modules. Emphasis on diagnosis, analysis, and testing so you can understand the problem and correct it. Diagnostic information presented with the most logical and easiest to isolate problems first to help you identify the majority of routine failures quickly. Step-by-step instructions for teardown and assembly.
Summary listing at the beginning of each group of all applicable specifications, wear tolerances, torque values, essential tools, and materials needed to do the job. -UN-23AUG88 An emphasis throughout on safety—so you do the job right without getting hurt. This technical manual was planned and written for RW5560 you—an experienced service technician. Keep it in a permanent binder in the shop where it is handy. Refer to it when you need to know correct service procedures or specifications. O53,INTRO3 -19-07OCT85 00 2