18. OUTLINES OF SERVICE 18.1.5 CARRYING OUT KOWA (Komatsu Oil Wear Analysis) KOWA is a maintenance service that makes it possible to prevent machine failures and downtime. With KOWA, the oil is periodically sampled and analyzed. This enables early detection of wear of the machine drive parts and other abnormalities. We strongly recommend you to use this service. The oil analysis is carried out at actual cost, so the cost is low, and the results of the analysis are reported together with recommendations which will reduce repair costs and machine downtime.
KOWA analysis items Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to meas- ure the density of iron, copper, and other metal wear particles in the oil. Measurement of quantity of particles This uses a particle quantifier index measurement machine to measure the quantity of iron particles of 5 m or more, enabling early detection of failures. Others Measurements are made of items such as the ratio of water in the oil, density of the antifreeze coolant, ratio of fuel in the oil, and dynamic viscosity, enabling a highly precise diagnosis of the machine’s health. Oil sampling Sampling interval 250 hours: Engine 500 hours:
Other components Precautions when sampling Make sure that the oil is well mixed before sampling. Perform sampling at regular fixed intervals. Do not carry out sampling on rainy or windy days when water or dust can get into the oil. For further details of KOWA, please contact your Komatsu dis- tributor. 3-7