Komatsu — 29.1EXPLANATION OF COMPONENTS

29. HANDLING JOYSTICK STEERING SYSTEM To ensure that you operate the joystick steering safely and efficiently, please read this section before using it. 29.1EXPLANATION OF COMPONENTS 1. Joystick: Converts the displacement of the steering lever into voltage and controls steering according to the operation of the F-N-R button. 2. Controller: Controls steering according to the electric sig- nals received from the joystick and outputs the control signals. 3. Electromagnetic proportional valve: Converts the output of the controller. 4. Pilot pump: Supplies oil to the steering pilot circuit. 5. Stop valve:

Cuts out the pilot oil pressure to reduce the end shock and prevents the steering valve from re- lieving at each steering end. 6. Steering valve: Controls the operation of the steering cylinder with the pilot oil pressure. 7. Steering cylinder: Articulates the vehicle to the right and left. The joystick steering system is a system to the wheel loader by operating the joystick instead of the steering wheel. The joystick is designed to reduce operator fatigue by allowing light-touch steering operation with short movement of the joy- stick.

The joystick steering system consists of the electrical circuit (joystick, controller, joystick ON/OFF switch), hydraulic circuit (solenoid proportional valve, stop valve, steering valve), and joystick console (joystick position adjustment, armrest position adjustment). 5-8