29. HANDLING JOYSTICK STEERING SYSTEM 29.5 ADJUSTMENT OF JOYSTICK CONSOLE ¤ WARNING When adjusting, park the vehicle on a level and safe place. Adjust before starting operation or when the operator changed. Before adjusting the console, adjust the operator's seat so that the operator can press the brake pedal fully with his back fitted to the seat back. A Adjustment of joystick Loosen lever 5 and move it to the forward end, then tighten it. Turn lever 2 forward and set joystick lever 1 to a desired position. After setting, release lever 2 . Forward/Backward adjustment:
130 mm (5.1 in) (At knob top) Loosen lever 5 and move it backward until joystick lever 1 contacts the stopper, then tighten lever 5 . In this way, joystick lever 1 can be set to the desired position, and there will be no need to adjust its position in future. B Adjustment of height of armrest (Left-hand) Turn grip 6 to unlock the armrest, then set the armrest to a desired position. After setting, tighten the grip securely. Vertical adjustment range: 35 mm (1.38 in) C Sliding of console ¤ WARNING When traveling or operating the work equipment, be sure to lock the console at the forward stroke end. When riding and getting off the vehicle, raise lever 3 and slide the console backward.
At this time, do not stop the console halfway, but slide to the stroke end. After riding the vehicle, be sure to slide the console to the forward stroke end and lock it there. 5-15