Komatsu — 34.2 OPERATION METHOD

34. AM/FM RADIO-CASSETTE STEREO RECEIVING RADIO BROADCASTS 1. Turn ON the ignition key, then turn on power switch 1 of the car stereo. 2. Select either AM or FM band with the band select switch 2 . 3. Tune to the desired station using the preset switch or tuner switch 3 . 4. Adjust the volume, the balance between left and right speakers and the sound quality to your choice using the respective buttons. 5. When turning off the radio, turn power switch 1 counterclockwise until it clicks. REMARK When changing over to radio while listening to a cassette tape, press the EJECT button to stop the tape. Simply insert a tape to change over to cassette tape mode while listening to the radio.

AUTOMATIC TUNING Pressing the “SEEK” switch shifts the receiving frequency in the higher frequency direction, then stops shifting automatically at a position where a station is picked up. MANUAL TUNING Pressing L -shaped tuner button 1 raises the receiving frequency by 9 kHz in AM and by 0.1MHz in FM for each press. Pressing the M - shaped tuner button 2 lowers the receiving frequency similarly. Pressing either of these buttons continuously shifts the receiving frequency continuously.

AUTOMATIC SELECTION BETWEEN MONAURAL AND STEREO RECEIVING MODES When the FM stereo broadcasting waves currently being re- ceived are too weak for normal receiving (such as receiving a long distance from the broadcasting station or in the mountains), the system automatically shifts from stereo to monaural mode to sup- press disturbing noise. It automatically returns to stereo mode when the intensity of the radio wave being received recovers. 5-47