36. HANDLING MULTI MONITORING SYSTEM 36.3 SWITCHING MONITOR SCREEN When the engine is started, it is possible to switch to the following 5 mode screens on the monitor mode display by keeping the panel switch pressed for more than 2 seconds. 1. Monitor mode This mode is normally displayed when the engine is started. 2. Load meter mode This is used to measure the load in the bucket. 3. Maintenance mode This displays the time remaining to the next oil change or other maintenance point. 4. Supply oil and coolant mode This is used instead of a memo to record the amounts of oil, water, or fuel that are added. 5.
Working record mode This is used to display the working time and to print out the working record. 5-67