36. HANDLING MULTI MONITORING SYSTEM 5. To delete the data in aggregate value display portion 2 during operations, press the figures, sub-total switch and load meter switch together for at least 2 seconds. NOTICE When carrying out Step 5, the data will also be deleted from the storage device for the multi monitoring system. 6. After loading the material into the bucket, tilt the bucket fully and raise the boom. The buzzer will sound, and at the same time, the load in the bucket will be displayed in load weight display portion 3 , and the aggregate value will be displayed in aggregate value display portion 2 .
The aggregate value is the display and aggregate data for a maximum of 300 buckets for one type. 7. If the data that has been weighed is not needed, press the cancel switch on the bucket control lever. The data is canceled and the display returns to the previous measurement. The data can be canceled using the cancel switch only while the weight of the load in the bucket is being displayed in load weight display 3 (approx. 15 seconds). 5-72