Komatsu — 36.3 SWITCHING MONITOR SCREEN

36. HANDLING MULTI MONITORING SYSTEM Method using remaining display measurement It is possible to calculate the aggregate value in categories for each material being handled up to a maximum of 5 types. It is possible to change the setting for types A to E for each type of material being handled, and to record the remaining value for each material during the operation. 1. Keep the load meter switch on the panel pressed for at least 2 seconds. Screen 3 is displayed. 2. Press the NEXT/RENEW switch for at least 2 seconds. The alphabet in type display portion 1 will change to yellow and will flash. 3. Press the figures, sub-total switch. The alphabet in type display portion 1 will change in turn.

4. When the setting for the material being handled is completed, press the NEXT/RENEW switch and for at least 2 seconds. The alphabet in type display portion 1 will change to blue. 5-74