Komatsu — 36.3 SWITCHING MONITOR SCREEN

36. HANDLING MULTI MONITORING SYSTEM METHOD OF SELECTING LOAD METER PRINT 1. Press the working record switch on the panel for at least 2 seconds to display screen 3. 2. Press the NEXT/RENEW switch for at least 2 seconds. The mode selection display (A or B) will change to yellow. 3. Press the figures, sub-total switch and select the desired output mode. Mode A: Each individual weighed load is printed out. Mode B: Only the sub-total load and total number of loads are printed out. 4. Press the NEXT/RENEW switch for at least 2 seconds. The display for the selected mode will change to green, and this completes the selection of the output mode. 5-93