Komatsu — 36.4 DISPLAY WHEN THERE IS ABNORMALITY

36. HANDLING MULTI MONITORING SYSTEM 36.4 DISPLAY WHEN THERE IS ABNORMALITY If any abnormality occurs in the machine, the display automati- cally switches to the abnormal display, and the warning lamp inside the main monitor is actuated according to the seriousness of the abnormality. Flashing of check lamp (caution item) Operation can be continued, but carry out inspection and main- tenance of the problem location as soon as possible. Flashing of caution lamp + buzzer (emergency item) Stop operations immediately, and carry out inspection and maintenance of the problem location. Example of abnormality display screen 1.

When a disconnection has occurred in the wiring harness going to the coolant level 2. When an abnormality has occurred in the brake pressure 36.4.1 RESETTING TO ORIGINAL MODE FROM ABNORMALITY DISPLAY SCREEN Press the NEXT/RENEW switch and figures, sub-total switch on the panel together for at least 2 seconds. This makes it possible to reset to the original mode from the abnormality display screen. 5-95