. OPERATION MACHINE OPERATIONS AND CONTROLS Check Fuel Level, Add Fuel WARNING After checking, turn the switch back to the OFF position. 3 - 119 When adding fuel, never sp ill the fuel or let it overflow. It will cau se fire. If any fuel has spilled, wipe it up completely. If fuel has s pilled ov er soil or sand, remove that soil or sa Fuel is highly flammable an d dangerous. Never bring fla mes nea r fuel. 1. Turn the engine star ting switch to the ON position an d check (1) on the monitor panel fo r fuel le 2.
If fuel is found to be low, unscrew fuel filler cap (F) on the fuel tank and add fuel th comes up to the hig Fuel tank capacit Position of tip (a) o Approx 50 mm (2 in rough the filler port until float gauge (G) hest point. y: 400 liters (105.68 US gal) f float gauge (G) when fuel tank is full: ) 3. After adding fuel, pu sh float gauge (G) straight down with fuel filler cap (F). Be care tab of fuel filler cap ( ful not to get float gauge ( G) caug ht in the F), and tighten fuel filler c ap (F) s ecurely. REMARK If breather hole (3) on th e cap is clogged, the pressure in t he tank will drop and fuel will no t flow. Clean the hole from time to time.