Komatsu — Slide Number 1

. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil draining the oil. 4 - 63 temperature to go do wn before performing t his operation. 1. Remove dipsti cloth. 2. Fully insert dip stick (G) into the filler 3. Pull out dipstic k (G) and check that t he oil level i s between the (H) and (L) ma rks on the dipstick. 4. If the oil does not reach the (L) mar the cap of oil fi ller port (F) and add Remove dipsti ck (G) when adding o 5.

If the oil level is above the (H) ma drain valve (P) and drain the excess Set a contai ner to catch the oil un der drain va lve (B) before 6. After checking oil level or adding oil, insert the di pstick (G) into the hole and in