. SAFETY SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION 2 - 21 STARTING EN If t here is a warnin g tag hanging from t he work e quipment lever, do not start t he engine or touch t he levers. CHECKS BEFORE STARTING ENGINE tarting the engine at the beginning of the day's work. he window glass to ensure a good view. he lens of the working lamps, and check that they light up correctly. Carry out the follo wing checks before s tarting the engine a t the beginning of the day's wor Remove all dirt from the surface of t he window glass to ensure a good view.
Remove all dirt from the surface of t he lens of the workin g lamp s, and check that they li Check the coola nt level, fuel level, a nd oil level in engine oil pan, check for clogging of th e air cleaner, and check for damage to th e electric wiring. Adjust the opera tor's seat to a positio n where it is easy to carry ou t operations, and check that there is no damage or wear to the s eat belt or mounting clamps. Check the oper ation of the instrume levers are all at the Neutral position. Before starting t he engine, check th at lock lev er (1) is in position (L). Adjust the mirro the mach clearly from the operator's seat.
When adjusting , see "Rearview Mirr ors (PAGE Adjust the rear- view camera so that the area t o the rear machine can be seen clearly from th e operato r's seat. For details of the Rear View Cam method of adjustme era (PAGE 3-125)". Check that ther e are no persons or in the area arou nd the machine.