Scania — Dismantling and assembly

Engine Ch 1 page 134 14. Make sure the shaft is not loose. If it is, it can be locked using screw locking compound. First clean thoroughly using a suitable solvent. 15. Tighten the rotor shaft using socket 8023. Tightening torque 34 Nm. 16 Refit the rotor and spin it by hand to make sure it rotates easily. 17. Inspect the O-ring on the cleaner housing cover and fit it with a lock nut. Tighten the lock nut to 15 Nm. SHOP MANUAL MT41 - 12.2004