Scania — Cylinder head

Engine Ch 1 page 149 Cylinder head Intake valve Valve head angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.5 Minimum dimension A for ground valve . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 2.6 mm Distance between the surface of the cylinder head and the valve head . 0.75-1.8 mm Exhaust valve Valve head angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.5 Minimum dimension A for ground valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 mm Distance between the surface of the cylinder head and the valve head . 0.66-1.8 mm - Check dimension A for each valve.

- Grind the valves in a valve grinding machine Minimum dimension A for ground valve Intake valve seat Seat angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.0°-20.5° Width of contact surface A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 - 2.6 mm Valve seat insert, outer diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46.054 - 46.065 mm Seat for valve seat insert, diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46.000 - 46.016 mm Seat for valve seat insert, depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11.25 - 11.35 mm Oversized valve seat insert: Outer diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46.254 - 46.265 mm Seat for valve seat insert, diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46.200 - 46.216 mm Cooling temperature when fitting valve seat insert . . . . . . . . . . . . . . . . . . approx. -80°C SHOP MANUAL MT41 - 12.2004