Engine Ch 1 page 155 Troubleshooting tables White smoke White smoke, water vapour SHOP MANUAL MT41 - 12.2004 Effect Cause Troubleshooting Action Incompletely burnt fuel Cold engine The white smoke starts to turn blue and disap pears when the engine is warmed up If possible: reduce en gine speed or put the engine under load Install a white smoke limiting device (exhaust brake) Install flame heater Install an engine heater Too much fuel in rela tion to air at low com bustion temperatures. Injection timing too late Inlet valve does not open properly. Valve adjustment disturbed.
Broken delivery valve spring, uncontrolled injection Disconnect one delivery pipe at a time and listen for changes in the engine sound. WARNING! Be careful when disconnecting the delivery pipes as the pressure is extremely high and could cause injury Leaky injector, dripping Effect Cause Troubleshooting Action Water in the combustion chamber Leaky charge air cooler Test pressure (air 0.5 bar, liquid 4 bar) Leaky cylinder head gasket The fault is also present when the engine is hot Cracked cylinder head (not cracks between valve seats) If the fault is hard to trace: Change all cylinder heads for exchange cylinder heads. (Or test pressurizing all cylinder heads.
Heat the cylin der heads before pressurizing them.) Crack in cylinder liner