Engine Ch 1 page 169 SHOP MANUAL MT41 - 12.2004 Effect Cause Troubleshooting Action Fuel too hot Incorrect fuel specifica tion Check density and vis cosity Low charge air pres sure Check charge air pres sure Abnormal pressure drop in intake piping Check the vacuum before the turbocharger, max. 500 mm wc. Check the air filter Worn engine Check “blow-by” in crankcase Correct value for new engine: 0 - +10 mm wc (flow rate 60 - 100 l/min.) Worn crankcase ventilation: -50 - +20 mm wc Leaky valves Take compression readings and compare those of the different cylinders Wrong injection timing Intake air temperature too high Check the temperature of the air before the engine.
Above +25 °C reduces engine power Exhaust counterpres sure too high Take a reading, recom mended counterpres sure: 500 mm wc, max. 1000 mm wc Intake counterpressure too high See “Low charge air pressure”, page 48 Incorrectly adjusted injection pump Check in a pump test bench Blocked fuel consump tion gauge Binding injector Injector’s nozzle nut tightened too hard Exhaust brake/white smoke limiter throttle in closed position