Engine Ch 1 page 32 Diagnostic lamp and switch (810001 - 810035) The diagnostics lamp comes on for one (1) second when the system is started. The diagnostics lamp will be lit continuously while a fault code is active. With the aid of the diagnostics switch, the diagnostics lamps flash out any fault codes. The diagnostics lamp remains lit continuously while disconnecting, i.e. until voltage to the control unit is switched off, provided that the coordinator does not disconnect before this point.
1 2 Diagnostic switch The diagnostics switch for the ECU or the coordinator is located to the switch panel right hs The diagnostics switch consists of a switch to which a bulb for the ECU and a bulb for the coordinator are connected. 3 SHOP MANUAL MT41 - 12.2004