Engine Ch 1 page 52 13. It is easier to position the slide hammer if one of the lower rocker cover bolts is removed. 14. Withdraw the unit injector. If the unit injector is stuck, tap carefully with a rubber mallet on the solenoid valve housing. Important! The unit injector is not to be dismantled. Renew the entire unit. 512256 15. Remove the sealing washer from the bottom of the injector seat, (if it was left behind when the unit injector was removed). 16. Detach the intake manifold, fuel manifold, ventilation pipe for the cooling system and the exhaust manifold. 17. Remove the cylinder head. Mark the cylinder heads if more than one is being removed at the same time.
SHOP MANUAL MT41 - 12.2004