Scania — Removing the cylinder liners

Engine Ch 1 page 87 Removing the cylinder liners 1. Mark the liners with the numbers 1-6. The mark is necessary so that the liners can be refitted in the same place and position as previously. Note: The mark must be made only on the surface indicated in the illustration. Other surfaces are for sealing. 2. Withdraw the cylinder liner using puller 99 066 and hydraulic cylinder 8036. Fit spacers under the support lugs to avoid damaging the surface of the block. 8036 3. Remove the sealing ring in the cylinder block. 8215 Cylinder liner extractor with hy­ draulic cylinder SHOP MANUAL MT41 - 12.2004